Configuring Kpad 3.0
RIMSS KUBapp Interface Configuration
The RIMSS KUBapp program will need to be loaded onto every computer that you would like to have interfaced with the Kubota Kpad 3.0 program. You can download the KUBapp folder here.
The link will initiate an automatic download of a zipped folder called KUBapp.zip. Navigate to your downloads folder to find the file. Double click to open the zipped folder. The KUBapp folder will be in this zipped folder. Simply move or copy the entire folder to the C:\ directory of the PC you are configuring.
Now you will need to set up the Basket setting within Kubotalink.
First have a RIMSS session open then log into Kubotalink and open Kpad.
Choose a Model
- Open
- Select a part.
- Add to basket.
After you clicked on the Basket, this screen will appear. Click on “Settings”.
Then select “Admin”.
Connection Settings window
1. KubotaLink Settings
a. Leavethe check mark in Enable Connection box
b. Enter the Dealer ID and Password. These can be found by going to Rimss:
File > Manage > ManageFTP Service
2. DBS Settings - These are static and needto be left alone.
3. Application Mode - Uncheck the “Local” box.
Click “Save and Close”.
An example of what it should look like:
Make sure Basket View Setting are set as shown below.
Click “Save and Close” when finished.
Log out of Kpad and Rimss.
Log back into Rimss and open Kpad.
To test, add a part into the basket again and see if the Rimss info appears.
Two things to trouble shoot if the Rimss info does not appear.
1. The part number has to be set up in Rimss,
2. The KubApp may need to be kickstarted.
Go to: Inventory > Utilities > Reset All Interface Programs and reset.